Phaser vs Flanger>Delay

The parameters between EFX Types 4:Phaser and 36:Flanger/Delay would seem to
suggest the following similarities for what you want in combining phasing and
delay:

4:Phaser                    36:Flanger>Delay
========                    ================
<Manual>                    <HF Damp>
100Hz - 8kHz                200Hz - 8kHz
(frequency band affected)

<Rate>                      <FlgRate>
0.05Hz - 10.0Hz             0.05Hz - 10.0Hz
(cycle of undulations)

<Depth>                     <Flg Dpt>
0-127                       0-127
(of undulations)

<Res>                       <Flg Fbk> and <Dly Fbk>
0-127                       -98% - +98%
(amount of
Phaser feedback)

<Mix>                       <Flg Bal> and <Delay Balance>
0-127                       D100:0E to D0:100E
(phaser to original)

<Pan>                       (no direct equivalent)
L64 - 0 - 63R

<Level>                     <Level>
0-127                       0-127

(no direct equivalent)      <Flg Dly> & <Delay>
                            0-100ms & 0-500ms

Benjamin Tubb
brtubb@cybertron.com
http://www.cybertron.com/~brtubb